Banner Ad 1

Revell Type 7 R/C, ok I will do it!

Heard about a new product? Announce it here!

Postby D Manley » Fri Apr 09, 2004 6:46 pm

Due to the popularity of this exciting new kit; I have decided to produce an affordable R/C conversion package for this boat.
I expect to be able to offer this for approximately 85.00 and it should be as simple and efficient as my high end kits.
It will likely include gas ballast tank, forward dive plane output and linkage, aft rudder output and linkage, and access hatch in top of main compartment.
Will include two motors and 4.8v battery pack
This will NOT be a cylinder, it will be an easy to install, set of pressure bulkheads and I will try to make this as least invasive as possible.

You will need to supply speed control with bec, battery charger for 4.8v on board batterys, and a 4 or more channel radio.
Now the bad news, I do not know when I will have this ready for ordering as I have other more pressing projects to tend to, but I hope to have it available this fall.

Small World Models.
:)
User avatar
D Manley
Registered User
 
Posts: 126
Joined: Mon Feb 24, 2003 3:11 pm
Location: 3123 idlewild wy, San Diego CA 92117

Postby ThorDesign » Fri Apr 09, 2004 7:41 pm

Dave,

Already well underway at ThorDesign and Atomic Subs. Lyle Jansma and I have been working together on this project, but have tried to keep it quiet. Your approach is somewhat different than ours as ours will come with a cylinder with electronics.




Edited By ThorDesign on 1081554222
ThorDesign
Registered User
 
Posts: 347
Joined: Fri Feb 21, 2003 9:16 pm
Location: OZ

Postby Novagator » Fri Apr 09, 2004 8:24 pm

Cool! :cool:
John Cottingham
Sub Committee Member #2721
User avatar
Novagator
SubCommittee Member
 
Posts: 825
Joined: Wed Aug 27, 2003 7:24 am

Postby Captain Nemo12 » Fri Apr 09, 2004 8:37 pm

Right back at ya! :cool:
280 meters.... and she's still in one piece!
-Jurgen Prochnow, Das Boot.

http://eisernwolf.blog.com
User avatar
Captain Nemo12
Registered User
 
Posts: 293
Joined: Sun Sep 14, 2003 3:56 pm

Postby Jefff J » Fri Apr 09, 2004 10:02 pm

hello fellow Revell VII fans...
I am glad the intrest in this kit is so high. I know any after market upgrades to this kit are going to be a hit. And a gold mine to the guys that come up with them. I have 2 kits on order as I type. Good luck to you both. And a big thanks from me and the rest of us Revell'ers. :D Jeff Jones
One things for sure, they won't be expecting us.... s/c# 0258
User avatar
Jefff J
Registered User
 
Posts: 41
Joined: Tue Feb 03, 2004 6:52 pm
Location: usa

Postby Casey Thrower » Fri Apr 09, 2004 10:54 pm

What kind of glue should you use on this boat so it won't come apart and also, how do you plan on keeping the deck on to rc it?
Casey Thrower SC Member #1675

"Oh Lord, Thy sea is so large and my boat is so small"
User avatar
Casey Thrower
Registered User
 
Posts: 281
Joined: Fri Feb 21, 2003 12:30 am
Location: Meridianville, Alabama

Postby MIT » Sat Apr 10, 2004 8:54 am

Where can one order this kit from ?

Thanks

Nick
User avatar
MIT
Registered User
 
Posts: 99
Joined: Wed Dec 03, 2003 10:49 am
Location: Milford CT

Postby Jefff J » Sat Apr 10, 2004 10:07 am

Casey, hey I know this one, good old fashion Tester glue, the kind you used as a kid!!! This will hold the plastic together in water. You can order these models from internethobbies.com, but you can expect a delay..... good luck Jeff J.
One things for sure, they won't be expecting us.... s/c# 0258
User avatar
Jefff J
Registered User
 
Posts: 41
Joined: Tue Feb 03, 2004 6:52 pm
Location: usa

Postby Jefff J » Sat Apr 10, 2004 10:10 am

if I glue the deck on, (brass) I was going to try 2 hr epoxy, thats if I split the hull, will have to wait until I get to that point. Or see what is working for some of the other guys. JJ
One things for sure, they won't be expecting us.... s/c# 0258
User avatar
Jefff J
Registered User
 
Posts: 41
Joined: Tue Feb 03, 2004 6:52 pm
Location: usa

Postby TennesseeJim » Sun Apr 11, 2004 9:51 am

Great idea on the upgrade kit(s)!

Keep us up-to-date on the status and let us know when they are available.

- Jim
TennesseeJim
SubCommittee Member
 
Posts: 53
Joined: Thu Jul 31, 2003 12:55 pm
Location: Nashville, Tennessee

Postby safrole » Fri Apr 16, 2004 12:52 am

Rumor has it (from a post by Torsten in the R/C forum) that Norbert Bruggen is going to hit a show on the 21st with a Revell kit. He said he will bring back a review after he attends.

Check out the link.

http://www.modelluboot.de/KITS/VII/VIIc.html
User avatar
safrole
Registered User
 
Posts: 274
Joined: Wed Aug 06, 2003 9:22 am
Location: Elkhart, Indiana

Postby raalst » Fri Apr 16, 2004 4:17 pm

I'll have a look as well.
be there on saturday (21 is wednesday)
anybody else going ?
Regards,

Ronald van Aalst

--------------------------------------------
Just here to Learn
User avatar
raalst
SubCommittee Member
 
Posts: 1319
Joined: Wed Feb 26, 2003 8:46 am
Location: netherlands, the hague

Postby comcardiv1 » Fri Apr 16, 2004 8:30 pm

Greetings, group

I just bought one of these kits this morning--not a bad job from our friends at Revell/Germany. I was thinking about what it would take to make it operational, but not being a sub guy I thought I'd check this board first. Glad I did--I'll be awaiting any announcements of aftermarket upgrades with great interest...

Gene Kirkland
comcardiv1
Registered User
 
Posts: 1
Joined: Fri Apr 16, 2004 8:18 pm
Location: United States

Postby boatbuilder1 » Fri Apr 16, 2004 11:22 pm

when will people learn .....................................
Dave Merriman has warned us all epoxy will trun to jelly if imersed too long
try j b weld or pc7 marine epoxy (yes epoxy) formulated for imersion hence the word marine
charlie



Time is a fleeting idea of man's invention.
its all relative
User avatar
boatbuilder1
Registered User
 
Posts: 392
Joined: Sun Mar 02, 2003 5:56 pm
Location: mid west

Postby JWLaRue » Sat Apr 17, 2004 11:51 am

Chuck,

Not strictly true.

Epoxies that have a cure time of something like less than 90 minutes will soften in water. Those with longer cure times will not be a problem for us.

I use several epoxies that have given me good service. West Systems and Anchor Bond (90 minute) being the two I most often use.

Recently I have been experimenting with a Scotch-3M epoxy (I don't have the part number handy) that has an even longer cure time and is supposed to be good for bonding different materials together...like plastic hulls and etched brass decks..... :) When it cures it is not the hard, brittle substance that most epoxies are, it seems to retain a slight amount of 'give' to it. This could be just what we need!

-Jeff
Rohr 1.....Los!
User avatar
JWLaRue
SubCommittee Member
 
Posts: 3868
Joined: Wed Aug 31, 1994 6:00 pm
Location: Annapolis, MD

Next

Return to New Product Announcements

Who is online

Users browsing this forum: No registered users

cron