Banner Ad 1

Sub-Driver 3.5 mod 2 -- **SOLD**

Have any sub 'stuff' to sell or trade?

Sub-Driver 3.5 mod 2 -- **SOLD**

Postby EricPW8818 » Fri Oct 25, 2013 3:55 pm

Up for grabs is a Sub-Driver 3.5 mod two from Caswell. The system is set up for snort operations. Included is the following:

Sub-Driver 3.5 Cylinder with two motor end cap
Two Standard Futaba servos
Large Snort system with controller
ADF2 Angle Driver
SES-II switch
Y-harness
4 cli-con connectors

This unit was the kit which was assembled and never completed. I am moving on to other endeavors and have to let this go. I will include shipping in the US.
All Paperwork will be included. Sold as is. PayPal preferred. Please Email me: EricPW8818 (at) aol.com

Asking $450

Thank you
Eric



Image
If a man does his best, what else is there ? George S. Patton
User avatar
EricPW8818
Registered User
 
Posts: 80
Joined: Sun May 11, 2003 3:00 pm
Location: Jax, FL

Re: Sub-Driver 3.5 mod 2

Postby ccontrol » Fri Oct 25, 2013 4:19 pm

What's the capacity of the ballast tank?
If you're not sure, tell me the inside dimensions of the tank.

Thanks!
Steve
ccontrol
SubCommittee Member
 
Posts: 39
Joined: Mon Mar 19, 2012 3:27 pm
Location: Sammamish, WA

Re: Sub-Driver 3.5 mod 2

Postby EricPW8818 » Fri Oct 25, 2013 5:13 pm

Not sure of capacity but it is 8 1/2" long inside.
If a man does his best, what else is there ? George S. Patton
User avatar
EricPW8818
Registered User
 
Posts: 80
Joined: Sun May 11, 2003 3:00 pm
Location: Jax, FL

Re: Sub-Driver 3.5 mod 2

Postby JWLaRue » Fri Oct 25, 2013 7:21 pm

Given a length of 8.5 inches and an internal diameter of 3.25 inches (wall thickness is 1/8th inch?), then the volume would be 70.5 cubic inches.

volume = pi * radius-squared * length

-Jeff
Rohr 1.....Los!
User avatar
JWLaRue
SubCommittee Member
 
Posts: 3857
Joined: Wed Aug 31, 1994 6:00 pm
Location: Annapolis, MD

Re: Sub-Driver 3.5 mod 2

Postby salmon » Sat Oct 26, 2013 2:11 am

The battery compartment looks really small, what was this going into?
If you can cut, drill, saw, hit things and swear a lot, you're well on the way to building a working model sub.
User avatar
salmon
SubCommittee Member
 
Posts: 517
Joined: Sat Jul 16, 2011 2:35 am
Location: Las Vegas, Nevada

Re: Sub-Driver 3.5 mod 2

Postby EricPW8818 » Sat Oct 26, 2013 8:35 am

The subdriver was set up with the battery terminals
Heading to the wet space in the hull. The forward compartment
Is a void space for more air for the snort system. This was
Going in to a 1/96 Oscar so there needed to be some extra
Volume.

Eric
If a man does his best, what else is there ? George S. Patton
User avatar
EricPW8818
Registered User
 
Posts: 80
Joined: Sun May 11, 2003 3:00 pm
Location: Jax, FL

Re: Sub-Driver 3.5 mod 2

Postby EricPW8818 » Sat Oct 26, 2013 11:15 am

SOLD
If a man does his best, what else is there ? George S. Patton
User avatar
EricPW8818
Registered User
 
Posts: 80
Joined: Sun May 11, 2003 3:00 pm
Location: Jax, FL


Return to SubSwap

Who is online

Users browsing this forum: Bing [Bot]