Haven't posted to this for a while, chiefly because the hull was up on a shelf gathering dust.
Anyway, finally tooled up the scopes and rudder. So that's all the glasswork out of the way on this boat, so next job is the props and railings, both will be fashioned from brass and soldered together.
The scopes are moulded in polyester GRP, and filled inside with polyurethane foam, which makes them float (just). the rudder was also moulded in polyester GRP, and filled with glass strands, very tough. Hull halves have been joined in the tool. The white bits on the yellow gelcoat, are just a wipe of filler here and there.