Sorry, always the wise guy.
My bulkhead mold worked out great so I had to try out my driveline today.
I have a short video coming.
Everything was just sitting in the hull and the prop was to big but it works.
I also figured out how I will hold the hull half's together.
I will have some brass L brackets on the inside along the seam in two places and two flathead screws on the tail above and below the rudder.
No don't tell my friend Crazy Ivan I am using exposed external fasteners on the hull.
But if done the right way to make them inconspicuous you will not notice them.
I would rather do that than cut up a perfectly good hull to open it up.
The screw slots follow the weld lines and once painted the same color as the hull will be invisible.
I made some cool stanchions that are threaded and accept the flat head screws. BD.