Worked on the NAUTILUS
for about eight hours, sanding and filling.
My least favorite thing but it will get me there.
I checked the diameter using a tool I made weeks ago.
Fits like a glove!
This means that she is 11cm in diameter as she should be at 72nd scale. AND it means that the hull is about 1/8 inch in thickness which was recommended to me. YAY ME!
Here she is with a good coat of primer grey.
There are a few flaws and pinholes showing but not as many as there could be. And it shows that the shape is pretty even all over. Shouldn't be too hard to fix.
Now I get to move on to the wheelhouse, the platform, diving planes and rudder.