Banner Ad 1

rc seaview

R/C Submarine modelers

rc seaview

Postby theraven » Tue Aug 03, 2010 3:42 pm

hi all
can anybody supply me with info
on how to fit control linkages to a rc seaview i am doin?
rudders no prob
just linkakes pref on 1 control rod
many thx
Registered User
Posts: 15
Joined: Tue Mar 23, 2010 9:34 am

Re: rc seaview

Postby chips » Wed Aug 04, 2010 12:17 am

Best thing is to use two servos for the dive planes. First servo is connected to the stern and bow (in the forward wing) planes - these are used for pitch control. Second servo controls the sail planes for depth control. The stern and bow planes move in oppositte directions - bow planes move up, stern planes move down. For the Moebius SEAVIEW, I used 36" long brass rods to make up the bow plane linkage. These are connected to the stern plane linkage with some Dubro or Great Planes wheel collares (be sure to replace the mild steel set screws with stainless).
Bob Gesking
SC# 1575
User avatar
Posts: 282
Joined: Fri Feb 21, 2003 11:41 pm
Location: Euclid (east of Cleveland), OH

Return to R/C Modeler

Who is online

Users browsing this forum: No registered users