Frank, you are too much.
But remember, no good deed goes unpunished-I need two.
All this for a custom WTC meeting the unique demands of the big DeBoer Seaview.
The motors are Graupner 600BB Turbo, which has the standard 3.17mm / 1/8" shaft.
I would need to connect those to a 3/16" dia. intermediate shaft passing thru the bulkhead to a wetside 3/16" dogbone connector.
Hopefully I can somehow return the favor at the SubRegatta?
543 Ponds Pointe Drive
Does the SubCommittee rock or what?