Banner Ad 1

Conversion of Total Immersions Nautilus to R/C

Nautilus, Seaview, and more

Conversion of Total Immersions Nautilus to R/C

Postby Bob the Builder » Tue Oct 20, 2009 11:37 am


The soft, white resin that Lee uses drives me crazy, and made this a very challenging build. The fitment is not remotely what I was hoping for, but for an R/C model, which will typically be viewed from 10+ feet away, it is just fine! Of course, having to work with a very badly started static build didn't help matters either...

As the model is quite heavy, there is not a lot of freeboard in full surfaced trim, but definitely enough to make it look good. I am particularly impressed with the gimbaled prop assembly. Pitch control is very good. Rudder response is actually far better than I'd anticipated through the use of a clear plastic insert. For anyone with a Nautilus model, I highly recommend this modification, which should take mere minutes to perform and results in an enormous improvement in steering response. I would estimate that it brought this particular model from a 12' turning diameter to a 5' turning diameter!

Enjoy the video and photos!





Bob Martin,
RCSub homepage:
User avatar
Bob the Builder
Posts: 788
Joined: Fri Feb 21, 2003 9:40 am
Location: Naples, FL

Postby Scott T » Tue Oct 20, 2009 12:23 pm

Great job.

User avatar
Scott T
Posts: 570
Joined: Fri Feb 21, 2003 2:01 pm
Location: Oklahoma City, OK

Return to Television and Movie Submarines

Who is online

Users browsing this forum: No registered users