Banner Ad 1

sorry to say : will not go to bremen 30/8

SubCommittee chapter in the Netherlands


Postby raalst » Mon Aug 18, 2003 4:33 pm

I am very sorry but I cannot travel to Bremen at the
weekend of 30/8.

Status of other projects :
I have several hydrophones built now, and I am almost
done with constructing a simple one which is actually
sensitive.
Regards,

Ronald van Aalst

--------------------------------------------
Just here to Learn
User avatar
raalst
SubCommittee Member
 
Posts: 1319
Joined: Wed Feb 26, 2003 8:46 am
Location: netherlands, the hague

Postby Scott T » Mon Aug 18, 2003 5:46 pm

How is your Kilo plastic kit conversion to RC going?
I purchased a Kilo after seeing your project posted on this site.

Scott
User avatar
Scott T
SubCommittee Member
 
Posts: 560
Joined: Fri Feb 21, 2003 2:01 pm
Location: Oklahoma City, OK

Postby raalst » Wed Aug 20, 2003 4:13 pm

I made my own WTC with my newly acquired lathe.
but
- it's too heavy (caps made from solid brass)
- the axle for the prop is not turning smoothly.

So, I decided to try again with plastic endcaps,
which will again be turned on the lathe.
I have not started this second attempt.

The hull is ready and all movable planes work.
I also found an acceptably sized 5-blade screw.

Ps. maybe better we continue discussion in the
general forums, so as not to "hide" this from
others possibly interested.

Thanks for your interest in my kilo project.
If you have specific questions I can make
detail a bit further or make a photo.
Regards,

Ronald van Aalst

--------------------------------------------
Just here to Learn
User avatar
raalst
SubCommittee Member
 
Posts: 1319
Joined: Wed Feb 26, 2003 8:46 am
Location: netherlands, the hague


Return to SubComNL

Who is online

Users browsing this forum: No registered users