I'm moving at the end of June and need to get rid of 3 of my first trial castings from my new molds.
All castings are 1/32 scale and about 62" long. All details are modelled including breather grating, skiff grating, a billion rivets (or so), and hull plating. The castings consist of white gelcoat over polyester resin and glass. The top sections are layed up nice and light for RC. The bottoms are a bit more sturdy with solid resin keels. Hulls are split at the center of the side keels. Some grinding will be necessary for mating the upper and lower halves.
Casting #1: has about 6 places where the gelcoat wrinkled over small air bubbles in the fibreglass. Lends a nice "beat up" look to the model. Integrity is not comprimized in the least and wrinkles are strictly cosmetic. Asking $300US
Casting #2: has some resin that got in under the gelcoat creating a small ridge that will need to be sanded down along the rear decking next to the skiff. Other than that, the model is in excellent shape. Asking $350US
Casting #3: turned out very well. 2 or 3 small "dents" in the gelcoat. I would have used this one for myself, but another casting turned out just slightly better. Asking $500US.
Shipping for these models is NOW INCLUDED within Canada and the US, so jump on them when you can! Once these ones are gone, I highly doubt that I'll do any more castings...
E-mail me at firstname.lastname@example.org for complete details and to request the pictures. Be sure to let me know which one you're interested in.