Banner Ad 1

Gerry Anderson STINGRAY Hull

Have any sub 'stuff' to sell or trade?

Gerry Anderson STINGRAY Hull

Postby roberthusar » Tue Nov 10, 2009 12:25 am

I found my big Stingray molds (top and bottom halves) and pulled an upper hull (blue) from woven fiberglass cloth and resin. Hull is about 48 inches long (tape measure) and beam over 12 inches. If any interests out there, I can continue and pull the lower halves. Asking $250 shipped to the lower 48 states. Take about 7 days after payment receipt to ship. No appendages, fins, etc. Scratch builder project for interesting results. Andy Hunt had one way back. Here's the link to the pics:

http://img691.imageshack.us/g/img1889.jpg/
roberthusar
Registered User
 
Posts: 42
Joined: Sun Oct 31, 2004 5:45 pm
Location: California

Re: Gerry Anderson STINGRAY Hull

Postby don baker » Tue Nov 10, 2009 5:14 pm

hi i have a rpm seehund ready to run i ran it at the subron 5 meet in tx
i will swap for your stingray hull you will need a transmitter on ch 55 the seehund runs great
email me don baker chris2@poncacity.net thank you don
don baker
SubCommittee Member
 
Posts: 20
Joined: Mon Feb 11, 2008 6:06 pm
Location: tonkawa ok

Re: Gerry Anderson STINGRAY Hull

Postby don baker » Sat Nov 14, 2009 11:42 pm

sold !! I WILL BUY THE STINGRAY HULL please email me your adderss for payment DON BAKER
don baker
SubCommittee Member
 
Posts: 20
Joined: Mon Feb 11, 2008 6:06 pm
Location: tonkawa ok

Re: Gerry Anderson STINGRAY Hull

Postby don baker » Wed Dec 02, 2009 4:49 pm

hi you need to contact me i sent you payment two WEEKS ago and i have tryed to email you and you will not reply
did you get my payment or not DON BAKER
Last edited by don baker on Fri Dec 04, 2009 12:37 pm, edited 1 time in total.
don baker
SubCommittee Member
 
Posts: 20
Joined: Mon Feb 11, 2008 6:06 pm
Location: tonkawa ok

Re: Gerry Anderson STINGRAY Hull

Postby roberthusar » Wed Dec 02, 2009 9:15 pm

Don,
Nothing showed. Paypal ? Physical check? email me at roberthusar@rocketmail.com please
roberthusar
Registered User
 
Posts: 42
Joined: Sun Oct 31, 2004 5:45 pm
Location: California

Re: Gerry Anderson STINGRAY Hull

Postby don baker » Fri Dec 04, 2009 12:36 pm

thank you ROBERT for the call
GLAD YOU GOT THE MONEY ORDER DON
don baker
SubCommittee Member
 
Posts: 20
Joined: Mon Feb 11, 2008 6:06 pm
Location: tonkawa ok

Re: Gerry Anderson STINGRAY Hull

Postby don baker » Thu Dec 10, 2009 12:35 pm

hi BOB
I HAVE TRYED TO CONTACT YOU FOR TWO DAYS
I SENT YOU THE CASH IN THE TIME YOU ASKED FOR !I GAVE THE EXTRA TIME YOU ASKED FOR TO DELIVER !
I HAVE TRYED TO HELP YOU OUT AND BE UNDER STANDING
SO NOW I AM FEED UP WITH THE WAY THIS DEAL HAS GONE I KEEP BENDING FOR YOU AND BEING A NICE GUY AND YOU
KEEP BLOWING ME OFF SEND BACK THE PAYMENT I SENT YOU
DON BAKER
don baker
SubCommittee Member
 
Posts: 20
Joined: Mon Feb 11, 2008 6:06 pm
Location: tonkawa ok

Re: Gerry Anderson STINGRAY Hull

Postby Myles Yancey » Thu Dec 10, 2009 4:56 pm

gentlemen I am now watching this post, I have contacted both parties concerned in this sale, I ask that you both follow my request.

Thank you
Myles
If you are not part of the solution to a problem then say nothing at all
User avatar
Myles Yancey
Registered User
 
Posts: 340
Joined: Fri Mar 18, 2005 6:04 pm
Location: Danville, Virginia

Re: Gerry Anderson STINGRAY Hull

Postby Myles Yancey » Thu Dec 10, 2009 9:17 pm

Gentlemen on further thought, I have decided to lock this thread and remind both parties
to contact me so that this matter can be cleared up.

Thank You
Myles
If you are not part of the solution to a problem then say nothing at all
User avatar
Myles Yancey
Registered User
 
Posts: 340
Joined: Fri Mar 18, 2005 6:04 pm
Location: Danville, Virginia

Re: Gerry Anderson STINGRAY Hull

Postby Myles Yancey » Tue Dec 15, 2009 3:09 pm

Myles Yancey wrote:Gentlemen on further thought, I have decided to lock this thread and remind both parties
to contact me so that this matter can be cleared up.

Thank You
Myles




Mr. Don Baker inform me today that Mr.Rober Husar has given him
a full refund.
Mr. Robert Husar has also informed me that he gave Mr. Baker an
additional monie's for his troubles.
To the best of my knowledge both parties involved have been satisfied
and the matter ha sbeen settled.
Thank you Don and Robert for settling this matter like gentlemen and as
quickly as possible....... :D

Myles


> HI Don
>
>
If you are not part of the solution to a problem then say nothing at all
User avatar
Myles Yancey
Registered User
 
Posts: 340
Joined: Fri Mar 18, 2005 6:04 pm
Location: Danville, Virginia


Return to SubSwap

Who is online

Users browsing this forum: No registered users