Banner Ad 1

Neptune mod, or late to the party.

This is the place to post your submarine build- ups.

Re: Neptune mod, or late to the party.

Postby salmon » Fri May 09, 2014 1:35 am

The new prop came in. It is smaller than I thought it would be, but Sam was thrilled. I had him put the prop on and we tested the new prop.


Pretty sure this one will not blow a fuse. Sam was disappointed in the speed. I can see why. It is listed as having a diameter of 40mm, but the shroud looks like it could handle 45mm (just guessing).

It is charging up for another run tomorrow.
If you can cut, drill, saw, hit things and swear a lot, you're well on the way to building a working model sub.
User avatar
Posts: 592
Joined: Sat Jul 16, 2011 2:35 am
Location: Las Vegas, Nevada

Re: Neptune mod, or late to the party.

Postby Sub culture » Fri May 09, 2014 8:12 am

The prop on a left is a prop shop kort prop. That would be a my choice for a neptune, but not cheap and it needs to be one that closely matches the inside of the shroud, the narrower the gap the better the thrust. The prop on the right is a 2-blade X prop, lots of pitch lots of blade area, and cheap as chips. the motor on the neptune should pull one of those easily enough.


Or you could have a go at making one of your own.
'Why are you staring at an empty pond?'

Want to dive your boat in crystal clear water? Then you had better Dive-in-
User avatar
Sub culture
SubCommittee Member
Posts: 2944
Joined: Fri Feb 21, 2003 6:55 am
Location: London, UK


Return to Builder Threads

Who is online

Users browsing this forum: No registered users