Banner Ad 1

Question about the WFLY FRP06-P 6 channel receiver

R/C Submarine modelers

Question about the WFLY FRP06-P 6 channel receiver

Postby JohnPhilley » Sun May 25, 2014 4:52 pm

Just purchased my first radio, a WFLY FT06-A which came with a FRP06-P receiver.
The instruction manual does not seem to provide much information, at least not for newcomers like me.
Does anyone know how this receiver is powered and how much voltage it wants? All I see are numbered pins.

Thanks,
John
JohnPhilley
SubCommittee Member
 
Posts: 12
Joined: Thu Jun 27, 2013 9:51 pm

Re: Question about the WFLY FRP06-P 6 channel receiver

Postby Ober Freak » Sun May 25, 2014 5:19 pm

All receivers work from 4.5V to 6V, many should also work up to 7.5V. The weak parts are mostly the servos which run from 4.8 to 6V, except market as HV (High Voltage) which will also accept 7.4V.
The will be powered through the ESC when equipped with an BEC, or if not with an extra battery. When looking at the servo wires the darkest color (black or brown) is ground, the middle one (red) is power and the lightest color (yellow oder orange) is the signal.
Ober Freak
SubCommittee Member
 
Posts: 74
Joined: Wed Jan 01, 2014 8:49 pm
Location: Hamelin, Germany

Re: Question about the WFLY FRP06-P 6 channel receiver

Postby JohnPhilley » Mon Jun 09, 2014 10:24 pm

Thank you very much for your help Ober Freak. I appreciate it very much.
JohnPhilley
SubCommittee Member
 
Posts: 12
Joined: Thu Jun 27, 2013 9:51 pm


Return to R/C Modeler

Who is online

Users browsing this forum: Bing [Bot], Google [Bot], Yahoo [Bot]